AnRVAndADog
Well-known member
2004 Winnebago Adventurer 33V (with the GM Engine)...
The procedure given me here is:
1. Insert ignition key, turn to ON, don't start engine.
2. Depress gas pedal to the floor 3 times quick (within 5 seconds).
3. Turn ignition key OFF, wait a second or two, remove ignition key.
4. Insert ignition key, start engine.
5. "Change Engine Oil" message not there.
This works!
)
The procedure given me here is:
1. Insert ignition key, turn to ON, don't start engine.
2. Depress gas pedal to the floor 3 times quick (within 5 seconds).
3. Turn ignition key OFF, wait a second or two, remove ignition key.
4. Insert ignition key, start engine.
5. "Change Engine Oil" message not there.
This works!
) 
