Ikeshel
Active member
I posted this in another area but only got 1 reply. Since we are new, I'm hoping that this isOK and that I can get answers to my questions
This is a new to us unit where I cannot get heat from the dash/floor vents.
First
When I rotate the temp dial and reach under the dash, I can feel the cable housing moving back and forth, don't know if it's a sleeve with a solid wire running through it.
Is that supposed to happen or is the sheath stationary and an inner cable move?
Also, I could not locate where it terminated under the dash. Any ideas?
On another note, we will be storing the rig until spring. The house batteries are shot. What are your opinions - should I replace them now or wait til spring? 1 battery is o few month old, the other 3 are 5+ years old (Previous owner only replace the one that died)
Also...
I'll be going every month to run the genny and start the engine. How long should they be run?
Should I park it with a full tank of diesel? What about fuel additives?
Thanks in advance
This is a new to us unit where I cannot get heat from the dash/floor vents.
First
When I rotate the temp dial and reach under the dash, I can feel the cable housing moving back and forth, don't know if it's a sleeve with a solid wire running through it.
Is that supposed to happen or is the sheath stationary and an inner cable move?
Also, I could not locate where it terminated under the dash. Any ideas?
On another note, we will be storing the rig until spring. The house batteries are shot. What are your opinions - should I replace them now or wait til spring? 1 battery is o few month old, the other 3 are 5+ years old (Previous owner only replace the one that died)
Also...
I'll be going every month to run the genny and start the engine. How long should they be run?
Should I park it with a full tank of diesel? What about fuel additives?
Thanks in advance
