What sealant I should use?
- Thread starter RVRAC
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Hfx_Cdn
Well-known member
Is it a threaded connector that you could undo and put a sealing ring on it. It is very tough sealing a leak in a pressurized line from the outside. You may have to cut a piece off then add 2 connectors.
Ed
Ed
Rene T
Site Team
Remove it and apply some teflon tape or pipe dope then re-install.
Prior member
Well-known member
- Joined
- Jan 20, 2015
- Posts
- 1,232
"West System" two part "G-flex" epoxy will seal it, but you'll never be able to get it apart if it is a threaded connection.
I have had excellent results with it on water heater connections and water filter connections
Jack L
I have had excellent results with it on water heater connections and water filter connections
Jack L
