Just changed the distributor module for the 2nd time, new coil, new fuel pump relay.
starter cranks all day and I watch the oil psi go up, and gauges pulse when cranking.
removed fuel filter on frame gas stream to front of vehicle.
no voltage at CRNK fuse. ran great until I installed a brake controller.
OBD I reads a 12 code = ECM operational, however ABS no read.
if I cant get this its one wire HEI distributor and new intake for a carbuator
starter cranks all day and I watch the oil psi go up, and gauges pulse when cranking.
removed fuel filter on frame gas stream to front of vehicle.
no voltage at CRNK fuse. ran great until I installed a brake controller.
OBD I reads a 12 code = ECM operational, however ABS no read.
if I cant get this its one wire HEI distributor and new intake for a carbuator