The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
I seem to have cranked the top an inch too high (it seemed fine) and now when I try to crank it down it just turns & turns, the top will not come down. Thought? Hints? Tricks?
Gosh I hope I haven't wrecked the camper!!
After a little research this is what I found......
1 You could have a shear pin that is broken. Your going to have to do a little digging to see whats moving when someone else is cranking.
2 Assuming it's a cable type system. You may have a loose or broken cable. Once again time to start doing some digging/ crawing underneath to check things out.
Make sure the camper is SAFE to crawl under....Chock both sides of the wheels on level ground is preferred.