Have a Winegard RoadTrip sdi. Recently got code 771 lost communication with satellite. Tried new cable from box to dish. Got new receivers from direct tv no help. It just say can communicate with satellite. Anything else I can try? Maybe coax cables inside some no good. Have power at unit and both side of fuse . Any help will be appreciated.
Direct tv
- Thread starter Xvinny
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
glen54737
Well-known member
What type of receivers?
I believe that's a sd dish on directv.
It might be the setup of the receiver.
Good luck with customer service they have gone downhill since att bought them although they didn't have far to go. If it can't be fixed by resetting power they send a tech.
I believe that's a sd dish on directv.
It might be the setup of the receiver.
Good luck with customer service they have gone downhill since att bought them although they didn't have far to go. If it can't be fixed by resetting power they send a tech.
Gary RV_Wizard
Site Team
I would be looking at the actual coax between the two (mostly the connections on either end) and the power & ground wires to the Roadtrip. And since you have the SDI model, also check the GPS module wiring - it may not function at all without the GPS feeding data to it.
The install manual may be helpful in checking it out.
https://www.rvsatellite.com/Manuals/Winegard/2452086_RoadTrip_Install.pdf
The install manual may be helpful in checking it out.
https://www.rvsatellite.com/Manuals/Winegard/2452086_RoadTrip_Install.pdf
