how do I remove the rear rotor on a P30 Chev motorhome?

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

jobguy

Member
Joined
Mar 19, 2005
Posts
11
Location
Minnesota
I want to turn the rotors on my motor home, a 1992 Winnebago on a Chevy P30 chasis. How do I remove the rear rotors? I have the grease cap off, now what? Please take the time to answer.
Thanks
 
It has been a while since I did my '88 Pace on a P30, but I believe I had to pull the axle to get the hub off.  I would suggest not turning the rotors, but replace them.  The thinner they get the less heat they can absorb and the will warp sooner.  They have a slight press with the hub and have to be tapped off.  Chevrolet has a RV chassis manual with a lot of good service info in it.  I got one at no cost by calling Chevrolet.  Good luck!
 
Back
Top Bottom