Would one of you good folks that has a Select Comfort Sleep Number bed measure the blower motor. All the SC site says is that it is about the size of a two slice toaster. The space under our bed is only 5 inches high ... will the blower fit? The bedroom in our MH is very small and there would be no space to put it on the floor without it being a tripping point. Thus we must use the storage space under the mattress ... it is one of those that you lift to access.
Sleepnumer RV mattress
- Thread starter Rollie
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Tom
Administrator
- Joined
- Jan 13, 2005
- Posts
- 51,924
Unfortunately, we're on the road, so I can't measure the size of our SN pump until we get home. I do know that it has a much lower profile than the clone one in our motorhome.
Barb
Well-known member
We have the RV Sleep Numbe rbed. I will measure the pump tomorrow, and let you know how big it is.
Barb
Barb
Barb
Well-known member
The pump measured 10x8x4.
Hope this helps
Barb
Hope this helps
Barb
Barb
Well-known member
No problem, your welcome
Barb
Barb
