EPDM Coatings
rvupgradestore.com Composet Products Custom Yacht Interiors

Author Topic: Wiring a Prodigy brake controler  (Read 1302 times)

1Longbow

  • ---
  • Posts: 5
Wiring a Prodigy brake controler
« on: May 12, 2008, 02:42:20 PM »
I picked up a used Prodigy controler from a friend,but he can't remember how its was wired. I'll be putting it in a 08 Dodge using thier harness. The harness from the controler has a BLUE ,BLACK ,WHITE and a RED wire coming from it. Could I get alittle help on which goes where as not to short something out. Thanks --1Longbow

Jim Dick

  • Forum Staff
  • ---
  • *
  • Posts: 7675
Re: Wiring a Prodigy brake controler
« Reply #1 on: May 12, 2008, 06:28:10 PM »
I picked up a used Prodigy controler from a friend,but he can't remember how its was wired. I'll be putting it in a 08 Dodge using thier harness. The harness from the controler has a BLUE ,BLACK ,WHITE and a RED wire coming from it. Could I get alittle help on which goes where as not to short something out. Thanks --1Longbow

Try the Tekonsha website. You can d/l the wiring instructions. Hopefully it will cover your unit. I just did a search on prodigy controller and found it.
Jim

Titusville, Florida
U.S. Navy Veteran
2000 American Dream 40' DP
2012 GMC Terrain
2006 Suzuki Boulevard C50T Motorcycle
http://photo.net/photos/jimdick

Lowell

  • ---
  • Posts: 1953
Re: Wiring a Prodigy brake controler
« Reply #2 on: May 12, 2008, 07:08:12 PM »
You can buy a wiring connector that plugs to your Dodge harness and plugs into the prodigy, there by eliminating any guess work.   Camping world has them and you can probably order one directly from Prodigy too..
Lowell

2005 Cherokee28A TT
pulled by 2009 Dodge 1500 Crew Cab 4X4
KF7YET

Tempe, Arizona

Mark R.

  • ---
  • Posts: 735
  • 1986 Executive Industries 1967 Ford Fairlane,toad
Re: Wiring a Prodigy brake controler
« Reply #3 on: May 12, 2008, 08:32:22 PM »
I picked up a used Prodigy controler from a friend,but he can't remember how its was wired. I'll be putting it in a 08 Dodge using thier harness. The harness from the controler has a BLUE ,BLACK ,WHITE and a RED wire coming from it. Could I get alittle help on which goes where as not to short something out. Thanks --1Longbow

black power, white ground, red brake switch, blue to brakes on trailer, great controller.
PS do not forget the diode!
If you do not stand behind our troops please feel free to stand in front of them!

1Longbow

  • ---
  • Posts: 5
Re: Wiring a Prodigy brake controler
« Reply #4 on: May 12, 2008, 10:08:08 PM »
Thank you for all the help--1Longbow
 ;D

 

Hosted by Over The Network