rvupgradestore.com Composet Products Fridge Defend
RV Life Magazine RV Park Reviews RV Trip Wizard

Author Topic: Slide awning replacement  (Read 1280 times)


  • ---
  • Posts: 78
Slide awning replacement
« on: August 09, 2005, 08:14:24 PM »
I have a 1998 American Tradition and need to replace my living room slide awning (that moves out with the slide).  Just the material.  I need to know how to get the end caps off the reel as they appear to be riveted.
2014 Fleetwood Excursion
Houston, TX

Steve, CDN

  • ---
  • Posts: 2389
  • VA3VH
    • The Pallys
Re: Slide awning replacement
« Reply #1 on: August 09, 2005, 08:35:36 PM »

Welcome to the RV forum!   I have a 98 Dream and had to re-do the stitching on the slide out awning using sail thread purchased at West Marine or equivilant.

The rivets have to be drilled out, but secure a vice grip to the awning core to prevent it from spinning out and possibly causing serious injury.

Work from the cap at the front of the coach and count the number of turns so the spring can be rewound to the same tightness.

This might be a good time to replace the rusted lock screw holding your awning material installed by Fleetwood with a stainelss steel screw...in fact repalce all those rusted screws while yoour're at it if you haven't done so already.

Let us know how you make out.
Steve, Forum Moderator
Home Page
My Polar Bear Mural