Day-Night Shade Removal

THutch · Apr 11, 2009

OK, I've got to restring the day-night shade in the dinette area of our 34H Meridian. But I can't see how the thing comes out. I can see "L" brackets and screws at the bottom sides of the valance, but cannot find any mounting at the top. It is under a cabinet, and the previous owner put floor tile inside the bottom of the cabinet...do I need to pull this up to look for screws?

Any help would be appreciated!

Tom

seilerbird · Apr 11, 2009

For instructions on how to remove the shades click here.

For instructions on how to restring the shades click here.

John Canfield · Apr 11, 2009

Tom - Winnie will have two screws (one near each end) and there will be a clip or two - you will need to release the tab on the clip after removing the screws. It is not necessary to remove the valance (or shouldn't be.) Use a mirror to locate the clips and/or screws you need to remove. Good links by seilerbird - thanks Tom!

THutch · Apr 13, 2009

Thanks! I'll give it a try.

Day-Night Shade Removal

THutch

Active member

seilerbird

Guest

John Canfield

Site Team

THutch

Active member

Latest posts

Members online

Forum statistics