Hi all, I have a 10' viking Saga pop up (2001) and it has a Centurion CS3000 power converter in it. I'm currently seeking some info since this camper does not have a battery, I would like to add one though. I did some reading and I know I need a battery box and I know I need a deep cycle battery. What I'm looking for is any/all of the following:
1) Wiring diagram for the CS3000 or instructions on the terminals to connect the battery to
2) The recommended gauge for the wire from the battery to the converter
3) Instructions on how the vehicle will charge the battery during towing
4) Any kind of generic document with an overview of how the above process typically works.
My goal is to be able to run the lights and the fan for the furnace, I realize the fridge will not likely make the food cold but may maintain the current temp, although i'd expect it to drain the battery quickly.
Any help would be greatly appreciated.
Kind Regards,
Matt
1) Wiring diagram for the CS3000 or instructions on the terminals to connect the battery to
2) The recommended gauge for the wire from the battery to the converter
3) Instructions on how the vehicle will charge the battery during towing
4) Any kind of generic document with an overview of how the above process typically works.
My goal is to be able to run the lights and the fan for the furnace, I realize the fridge will not likely make the food cold but may maintain the current temp, although i'd expect it to drain the battery quickly.
Any help would be greatly appreciated.
Kind Regards,
Matt