Sponsored by Winnebago Industries

Author Topic: 2010 Ellipse and Tour brochures, tag axle operation  (Read 1837 times)

John Canfield

  • Forum Staff
  • ---
  • *
  • Posts: 11807
    • Jane and John's Internet Home
2010 Ellipse and Tour brochures, tag axle operation
« on: August 21, 2009, 05:02:49 PM »
The 2010 Ellipse and Tour brochures should be ready to send out in a couple of weeks.

About the tag axle operation in the 42' models:

Tag-Axle Suspension Dump Switch:

The tag-axle suspension is a non-liftable, full-time suspension designed to increase the Gross Vehicle Weight Rating (GVWR). It is used when the rear
suspension/axle will be loaded to a weight greater than 20,000 lb (9072 kg).   Under certain conditions, air can be exhausted from the air springs to
improve maneuverability or traction on the drive axle via the tag-axle suspension dump switch.  The tag-axle suspension dump switch is operated by  a three-position, dash-mounted rocker switch.  The manual TAG DUMP mode is activated by pressing and holding the rocker switch all the way in. The AUTO DUMP mode is activated automatically during reverse gear applications when the rocker switch is placed in the middle (level) position. When you depress and hold the bottom of the rocker switch, the tag-axle suspension dump switch is placed in the OFF (down) position, and the TAG DUMP mode is inactive.
--John
2005 Horizon 40AD, 2006 Jeep Rubicon Unlimited
Our Horizon projects
Our weather

 

Hosted by Over The Network