How do you remove TV - 94 winnie brave 29rq?

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
M

mainbuss152

New member
Joined
Jul 27, 2009
Posts
2
I own a 94 winnie brave 29rq.....I've been trying to get the old crt tv out of the hardwood frame but to no avail,  I've loosend every nut and bolt I could find....but someone please tell me the magic words to get the ole analog beast out?

lost in the snow.....dave
 
My 1998 Chieftain has the plastic around it.  I take it you removed it.

I had a bolt on either side on the bottom.

I had a metal bracket that went up the side and over the top and down the other side.  this bracket needed to be lifted up and pushed back for my TV to come out over the metal tab front bottom.  Seems to me the bolts were in the cabinets on either side of the tv.

The metal bracket held the tv down and the metal tab bottom front kept it from sliding out.

Hope this gives you some ideas.

Russ
 
I too had this problem with my '95 Brave. After also removing every screw I could find (to no avail), I found the magic ones! The problem was getting the trim around the TV off. If you open the glass covers on both sides you'll see two screws on each side holding in the frame. Simply remove them and you can pull the trim straight out. From there you can access all of the hardware holding the TV in.

Harvey
 
You must log in or register to reply here.

Latest posts

Members online

Total: 1,113 (members: 14, guests: 1,099)

Forum statistics

Threads
131,972
Posts
1,388,443
Members
137,721
Latest member
Dmac3003
Back
Top Bottom