A turn signal light on my popup doesn't work, but only when the bulb is inserted. I've checked the voltage and the socket seems to be getting power (in that the volt meter registers an increase in voltage in sync with the other turn signal bulb). All seems to be well except when the bulb is inserted. I've substituted working bulbs more than once to ensure that it's not a bulb problem. I've checked the socket itself to see if the contacts are seating, and they seem to be. Tail lights work fine. Opposite side turn signal works fine.
If I had more hair, I'd tear some out....
Suggestions for further tests are welcome!
Thanks.
If I had more hair, I'd tear some out....
Suggestions for further tests are welcome!
Thanks.