From the time I took possession of my '07 TAB in April, '07 I've been plagued with what sounds to be a metal-to-metal noise coming from the rear upper part of the front passenger slide (made by HWH). The dealership referred me to Red Bay, and last Fall a three or four-man team there worked at it, making adjustments, which I understood were to the front and rear rollers. It seemed to quiet the problem somewhat for a few months; however, now it's as bad as ever. With the room in, the top of the slide to ceiling measures: front - 3 in.; rear - 3 5/8in. Also, I've found the tightening nut on the rear roller adjustment very loose. I cranked the rear up to about 3 l/4in, but have yet to drive the unit. Questions are: has anyone had a similar problem and what proved to resolve it? also, can anyone advise me just how adjustments can safely be made (by the owner)? Perhaps, there's a manual of instructions available? Many thanks...
Adjusting Frt. Passenger Slide on '07 Tiffin Allegro Bus (TAB)
- Thread starter hugh37
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Members online
- edjunior
- Alaskansnowbirds
- ferfer
- DonTom
- Savysoaker
- trbo323
- IBTripping
- CharlesinGA
- Rene T
- Mark_K5LXP
- Hfx_Cdn
- Boskie
- Arch Hoagland
- camperAL
- gwinger
- DutchmenSport
- garyb1st
- HueyPilotVN
- Isaac-1
- pappy437
- emiddleb
- dktool
- Larry N.
- Leonimo
- MRPerkins
- mweber (KC9NPT)
- tlmgcamp
- Tileman
- Derby6
- jlhog
- 56safari
- Viajeros
- Laura & Charles
- MDnSD
- mn blue skies II