EPDM Coatings
rvupgradestore.com Composet Products Custom Yacht Interiors

Author Topic: Winegard Model RM-DM46/DM00 & Dish Network  (Read 2874 times)

Treeman

  • ---
  • Posts: 28
Winegard Model RM-DM46/DM00 & Dish Network
« on: January 03, 2006, 10:41:55 AM »
I have the Winegard Model RM-DM46 manual dish being installed as oem equipment at LazyDaze. The reciever from Dish Network is the 311 DishPro.
Does anyone else have this configuration & does it work O.K.?
Many Thanks,
Treeman
Tacoma, WA
"If hard work were such a wonderful thing, surely the rich would have kept it all to themselves." - Lane Kirkland

John From Detroit

  • ---
  • Posts: 19796
  • ^My New Home^
    • Diabetics Forum
Re: Winegard Model RM-DM46/DM00 & Dish Network
« Reply #1 on: January 04, 2006, 09:46:51 AM »
I have a different configuration however there is no reason the 311 (or any 3xxDISH reciever whould not work with ANY dish other than bad orientation.

The 311 only wants a single LNB after all and most all the LNB's are identical in the job they do... Some do it better, some not so well,  Some last longer, others not long.  But the job is the same for all of them
Nothing adds excitement like something that is none of your business
My Home is where I park it.

Treeman

  • ---
  • Posts: 28
Re: Winegard Model RM-DM46/DM00 & Dish Network
« Reply #2 on: January 05, 2006, 10:25:24 AM »
Thanks for the response John,
I specifically had to go with the older 311 receiver and what Lazy Daze provides. The installer said to haul the 311 receiver down to CA when I pick up the motorhome, to make sure it works.
Your reply makes that unnecessary.
Thanks,
Treeman
"If hard work were such a wonderful thing, surely the rich would have kept it all to themselves." - Lane Kirkland

 

Hosted by Over The Network