Winegard Model RM-DM46/DM00 & Dish Network

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

Treeman

Active member
Joined
Dec 27, 2005
Posts
28
Location
Tacoma, WA
I have the Winegard Model RM-DM46 manual dish being installed as oem equipment at LazyDaze. The reciever from Dish Network is the 311 DishPro.
Does anyone else have this configuration & does it work O.K.?
Many Thanks,
Treeman
Tacoma, WA
 
I have a different configuration however there is no reason the 311 (or any 3xxDISH reciever whould not work with ANY dish other than bad orientation.

The 311 only wants a single LNB after all and most all the LNB's are identical in the job they do... Some do it better, some not so well,  Some last longer, others not long.  But the job is the same for all of them
 
Thanks for the response John,
I specifically had to go with the older 311 receiver and what Lazy Daze provides. The installer said to haul the 311 receiver down to CA when I pick up the motorhome, to make sure it works.
Your reply makes that unnecessary.
Thanks,
Treeman
 
Back
Top Bottom