4ducksrus
Well-known member
- Joined
- Nov 17, 2010
- Posts
- 814
So here's a new one (I think) for you guys. When we first purchased our MH my DH says he could hear all of the locks lock into place. After a very short while we noticed that the bedroom slide locks didn't make any noise anymore and we couldn't tell if we were locking them or not. Today I took the MH into a local RV dealership that works on Winnebago's and this is what I was told. The switches are there, but they're not hooked up to anything (the 2 bedroom slide lock switches). There isn't any juice going to them. So, when I got home I called Winnebago and gave them my Serial number and this is what I was told, my MH only has 3 locks. 2 on the large front slides and 1 on one of the bedroom slides. The slide with the bed on it does not have a lock. We have a switch, just not a lock. I'm in a state of confusion...what should I do? Do we even need the locks on the smaller slides? Have any of you had trouble with those slides taking off on you? We were told when we bought it that we had 4 locking devices for all 4 slides. Since we purchased it from Camping World out of state we'd probably have to go back there if we wanted anyone to do anything about this....!!