howell4
New member
I decided the front steps were a little flimsy on my 2011 Open Range JT337RLS or I am a little over weight or both.
http://members.cox.net/rhowell22/pic1step.JPG
I made a couple of brackets then hinged square tubing to the brackets. The brackets fit tight to the square tubing to hold them in place so they won't flop around.
http://members.cox.net/rhowell22/pic2step.jpg
The other end of the tubing has a nut welded to it with a large bolt screwed in to adjust for uneven areas. Made a big difference when going in and out of the trailer.
http://members.cox.net/rhowell22/pic3step.jpg
http://members.cox.net/rhowell22/pic1step.JPG
I made a couple of brackets then hinged square tubing to the brackets. The brackets fit tight to the square tubing to hold them in place so they won't flop around.
http://members.cox.net/rhowell22/pic2step.jpg
The other end of the tubing has a nut welded to it with a large bolt screwed in to adjust for uneven areas. Made a big difference when going in and out of the trailer.
http://members.cox.net/rhowell22/pic3step.jpg
