Brake Buddy with Cool Tech harness on Jeep JK?

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

FrontrangeRVer

Well-known member
Joined
Dec 12, 2008
Posts
1,433
Hi, I am going to install the Cool Tech wiring harness on our 2012 Jeep JK which I intend to tow behind my motorhome.  The Cool Tech harness is a plug and play that will give you lights on the Jeep. 

Can I plug in and use my Brake Buddy on my Jeep, or will I have issues using my brake buddy back feeding into the motorhome's 12 volt system?
 
To clarify; it shouldn't cause a problem. The only possible problem would be the brake switch output crossing the MH 12 Vdc and that won't actually hurt anything. It might mess with the turn signals but you can see that if it should happen; just brake while operating the turn signals during your start up check.
Ernie
 
Back
Top Bottom