Ford Fiesta as a toad (Need info)

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
C

concours

New member
Joined
Jul 22, 2012
Posts
2
I just bought a Ford Fiesta to tow at the back of may Motor Home ....I would like to know where to attach "exactly" the wire at the brake pedal because the direction column (universal joint) is very close to the brake pedal . Should i attach at the top right or at the bottom right or anywhere else ? I will use a READY BRAKE system.

Excuse my English i am a french speaking person.......Thank you in advance. 
 
Not sure how a Fiesta is set up, but the Ready Brake instructions normally have the cable clamped to the brake pedal arm just above the pedal. You would want the straightest pull possible between the pedal and the firewall along the arc of the pedal's normal travel, and the lower on the brake arm, the least force is needed to pull it. If your steering is in the way of that, you may have to contact Ready-Brake for recommendations. You can read the Ready-Brake instruction manual here.

Welcome to the Forum concours.
 
You must log in or register to reply here.

Latest posts

Members online

Total: 1,241 (members: 31, guests: 1,210)

Forum statistics

Threads
131,976
Posts
1,388,562
Members
137,726
Latest member
CampMike2270
Back
Top Bottom