brian20040101
New member
- Joined
- Sep 23, 2012
- Posts
- 1
hi, everyone. i am new to the forum and hoping to solicit some input from everyone. i just bought a used 2011 eclipse milan 27 foot trailer and used it on a fantastic 3000 mile trip from CA to UT. When i got home, i saw that all 4 tires were worn on the inside edge. Further checking showed that rear axle was bent, but the front axle was still straight. i also noticed that the white water tank was touching/sitting on top of the rear axle. i never fully filled the white water tank and did not overload the trailer on this trip, but not sure what the previous owner did.
Could it be that the white water tank at one time (assuming it was filled up by the previous owner) caused the bent on the rear axle?
If the reax axle bent was caused overloading (again, assuming the previous owner overloaded it), shouldn't both the axles be bent?
i will get it fixed, but would like to know what could possibly cause this and become more trailer savvy.
thank you very much,
brian.
Could it be that the white water tank at one time (assuming it was filled up by the previous owner) caused the bent on the rear axle?
If the reax axle bent was caused overloading (again, assuming the previous owner overloaded it), shouldn't both the axles be bent?
i will get it fixed, but would like to know what could possibly cause this and become more trailer savvy.
thank you very much,
brian.