EMan508
Well-known member
I've been dry camping in some cold places lately. My heatpump doesn't operate below 35 degrees which I think is normal. The odd thing is that my propane furnace works fine above 35 degrees and as soon as the temps go below 35 it blows cold air and goes into the lockout mode. If I turn it off and back on again it usually will just go back into lockout mode. I do not hear the flame ignite when the outside temp is below 35 degrees.
I suspect that the furnace needs to be cleaned and tuned. Is there a way to see/adjust the flame without pulling the entire furnace? I see no access from outside/under the RV for the flame.
Has anyone here removed the furnace on a Winnebago Adventurer 35U? I have the manual and have performed all the steps to remove it but it doesn't want to budge.
I have applied electronic contact cleaner to the thermostat switches. No difference in its operation.
-Eric
Edit by John: changed message icon to Topic Solved
I suspect that the furnace needs to be cleaned and tuned. Is there a way to see/adjust the flame without pulling the entire furnace? I see no access from outside/under the RV for the flame.
Has anyone here removed the furnace on a Winnebago Adventurer 35U? I have the manual and have performed all the steps to remove it but it doesn't want to budge.
I have applied electronic contact cleaner to the thermostat switches. No difference in its operation.
-Eric
Edit by John: changed message icon to Topic Solved