EPDM Coatings
rvupgradestore.com Composet Products PO Box Zone
Over The Network Custom Yacht Interiors

Author Topic: '97 Rockwood fabric loose?  (Read 974 times)

sonix

  • Posts: 2
'97 Rockwood fabric loose?
« on: February 05, 2013, 09:14:14 PM »
Hello everyone;
I noticed that the fabric on my tent trailer doesn't seem to be well attached to the box. I've attached a picture - it seems that there *should* be a pair of screws/rivets/something that hold it in place, but the holes are empty (rust only). The fabric is now totally loose.  It seems like if I were to use a screw, it'd be too long, and would jam the bed sliders.
I'm not sure what's supposed to be in there.

Has anyone successfully replaced their fabric on a tent trailer, and knows what's supposed to be holding the fabric in the groove?

Thanks

BigDfromTN

  • ---
  • Posts: 404
  • Memphis Area, Ten-O-Cee
Re: '97 Rockwood fabric loose?
« Reply #1 on: February 13, 2013, 12:24:51 PM »
I am not real sure but my guess would be that pop rivets would be in order.

HTH,  Don

sonix

  • Posts: 2
Re: '97 Rockwood fabric loose?
« Reply #2 on: February 13, 2013, 03:09:47 PM »
Just took a closer look last night - looks like they used allen head set screws!   Around 1/4" long, some metric size, around M6.  They just pinned the fabric in place - no holes in the fabric - genius!

 

Hosted by Over The Network