kellyvan426
New member
I recently purchased a used "2000" 36' Rexhall diesel pusher wtih 47,000 miles on it. It has one slide out in the living area. The slide out seems to function properly in and out and the seals seem to be in good shape. With the slide closed or retracted, I noticed on outside that it is sealed on the bottom and the top on the leading edge of the slide out. However, on the trailing edge only the bottom is touching the weather strip and I have a 1/2" gap at the top. Can I make this vertical adjustment myself? If so, Where are the bolts to do so?
I didn't get any documentation for this slide out when I purchased the coach.
I didn't get any documentation for this slide out when I purchased the coach.