4DogsRV
Well-known member
We went out for a shake down trip in our MH last weekend. We had a full hookup, but decided to test out all systems without all that while we were there. We were a bit concerned to discover that the water pump delivered absolutely no pressure. I primed the system as per the manual, opening all the faucets etc..... but no water was issuing out of the kitchen or bathroom faucest (shower) and the exterior showers were just "spitting".
The pump was running normally, not cavitating at all, but there was no pressure. The strainer is clean, the hot water tank full (we tried all that out while we were still fully hooked up), and I cannot find the reason why there was no evident pressure. Any suggestions?
The pump was running normally, not cavitating at all, but there was no pressure. The strainer is clean, the hot water tank full (we tried all that out while we were still fully hooked up), and I cannot find the reason why there was no evident pressure. Any suggestions?