RV fire and the RV that just wanted some love PICS..

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
had to move the lights around to get some good pics

installed more head liner  drive side  more work in the cabinets on the top there  and started on the pass side  over door  as you can see the blue block is where the solar charge controller is going    right next to where most of the info centers go 

the bigger box in the roof is where the roof fan is going      .....    giving how high my roof is  i am looking at just one type of fan to install  its around 380$ or some thing 
sorry for get the name of it  but it has the panel that you can install on the wall to make it open  and has the top on it that can be open in the rain  and fold down out of the way

all so with the big box you see a smaller box next to it    thats to suck air from the fan out  of that hole to out side or push air in

i have to make a big center pice  that is going to run along way up and down the rv  to pull that hot air out of the roof        fan well have a door on it  with a flap so i can take air and make it move any way i want    for them nights with out  AC  in no where land




 

Attachments

  • 1_006.jpg
    1_006.jpg
    120.7 KB · Views: 152
  • 1_007.jpg
    1_007.jpg
    112.4 KB · Views: 123
  • 1_008.jpg
    1_008.jpg
    115.6 KB · Views: 135
  • 1_004.jpg
    1_004.jpg
    84.9 KB · Views: 112
  • 1_003.jpg
    1_003.jpg
    84.1 KB · Views: 115
  • 1_005.jpg
    1_005.jpg
    97.8 KB · Views: 98
  • 1_002.jpg
    1_002.jpg
    119.2 KB · Views: 166
today's work

more head liner

i have all the tools to make the cabinets box's but i cant make the doors for them well have to find some one with a good router table and bets

 

Attachments

  • IMG_20131015_164429.jpg
    IMG_20131015_164429.jpg
    80.3 KB · Views: 107
  • IMG_20131015_164403.jpg
    IMG_20131015_164403.jpg
    80.2 KB · Views: 96
  • IMG_20131015_145402.jpg
    IMG_20131015_145402.jpg
    66.4 KB · Views: 82
  • IMG_20131015_144709.jpg
    IMG_20131015_144709.jpg
    72.1 KB · Views: 92
  • IMG_20131015_143146.jpg
    IMG_20131015_143146.jpg
    222.8 KB · Views: 102
  • IMG_20131015_145336.jpg
    IMG_20131015_145336.jpg
    72.5 KB · Views: 98
going down the passenger side  up to the roof 
this is the floor for the cabinets  . i was just test fitting it and seeing how it looks
i well start making the face for it soon

the long looking box cut in over the window is for the TV to slid up and down  on a  12v DC motor 
 

Attachments

  • IMG_20131106_145547.jpg
    IMG_20131106_145547.jpg
    108.9 KB · Views: 109
  • IMG_20131106_145534.jpg
    IMG_20131106_145534.jpg
    118.3 KB · Views: 95
  • IMG_20131106_145600.jpg
    IMG_20131106_145600.jpg
    101.1 KB · Views: 86
  • IMG_20131106_153339.jpg
    IMG_20131106_153339.jpg
    63.6 KB · Views: 98
  • IMG_20131106_153308.jpg
    IMG_20131106_153308.jpg
    86.7 KB · Views: 117
OMG!

You are a visionary, and a VERY talented person.
When I first saw those before pictures, I had a panic attack.
I'm mechanically inclined, and fix most anything, but I wouldn't have known where to begin on this project.

Best of luck.
 
sorry guys know i have been postting smaller news  some where else  on here so i well add  what some may have not seen 

its been a few months  working  on and off  over the bad weather we have had

pulled the older GM 350 / TH 400 out  sold it for 300$  nice guy came  out and help me pull it  .. so its not going in his hot rod car

started to drop the 8.1l in there and found  it did need some work 
so that put me back a few months

its now in there with the allison 1000 MH

started on wiring and fuel system  motor mounts  and more

i was all so pushed back on the exhaust system and the flags  where hard to find  was 3 months of looking to find the right parts

but the exhaust is now in and ready to go  but i again i wanted to go with the truck exhaust so the tran mounting had to be made in a way to stay out of the way 

power steering pump was all so a fun one  again wanted to stay with the truck setup as i all ready had a high flow unit
i had to edit the pulley to make it work  flip it around  and install it back word
doing this would give me room for the air pump for the brakes  i well install latter a tu-flo 550  that was used on the 8.1l 

 

Attachments

  • IMG_20140116_140036 (Copy).jpg
    IMG_20140116_140036 (Copy).jpg
    122.5 KB · Views: 128
this is when i say hand made  .. there is power tools ..  but  parts just flow out of  me i guess  ,,,  hey no bad jking added

this is the tans mount i was talking of    in some pics you can see the older one i made years ago for the TH400 trans
i well be adding a base for the mounts on top of the frame  if any one asks
 

Attachments

  • IMG_20140309_170634.jpg
    IMG_20140309_170634.jpg
    99.4 KB · Views: 95
  • IMG_20140309_171335.jpg
    IMG_20140309_171335.jpg
    100.3 KB · Views: 81
  • IMG_20140318_214011.jpg
    IMG_20140318_214011.jpg
    70.8 KB · Views: 75
  • IMG_20140318_214955.jpg
    IMG_20140318_214955.jpg
    87.4 KB · Views: 68
  • IMG_20140319_145406.jpg
    IMG_20140319_145406.jpg
    110.7 KB · Views: 95
  • IMG_20140319_153052.jpg
    IMG_20140319_153052.jpg
    107.7 KB · Views: 73
  • IMG_20140322_163800.jpg
    IMG_20140322_163800.jpg
    113.5 KB · Views: 73
  • IMG_20140322_172931.jpg
    IMG_20140322_172931.jpg
    71.5 KB · Views: 66
  • IMG_20140322_173242.jpg
    IMG_20140322_173242.jpg
    59.6 KB · Views: 68
  • IMG_20140323_164143.jpg
    IMG_20140323_164143.jpg
    83.8 KB · Views: 94
here is the power steering pump pulley that i had to edit
you can see i did add a shaft so i can use a puller latter to get it off if need be


last pic  LOL the only motor bay i know of i can stand up in  on 2 feet  if i want too
 

Attachments

  • IMG_20140225_154725.jpg
    IMG_20140225_154725.jpg
    102.4 KB · Views: 73
  • IMG_20140225_154730.jpg
    IMG_20140225_154730.jpg
    100.5 KB · Views: 58
  • IMG_20140225_154739.jpg
    IMG_20140225_154739.jpg
    105.1 KB · Views: 62
  • IMG_20140225_154805.jpg
    IMG_20140225_154805.jpg
    107.9 KB · Views: 63
  • IMG_20140304_164612.jpg
    IMG_20140304_164612.jpg
    118 KB · Views: 72
  • IMG_20140304_164451.jpg
    IMG_20140304_164451.jpg
    121.6 KB · Views: 62
  • 1392930059523.jpg
    1392930059523.jpg
    49.8 KB · Views: 110
i am looking at old videos  and so trying  for the frist time at video editing

video is very old

https://www.youtube.com/watch?v=QosV788AzDE&feature=youtu.be

that is the RV  day one

i well be making more
 
terry735001 said:
last pic  LOL the only motor bay i know of i can stand up in  on 2 feet  if i want too

I was going to say that's an interesting hydraulic footing you have there. Must get lots of comments at campgrounds.  :p

Stan
 
you know i had to really think about that  when you said  ...  interesting hydraulic footing... 

me i was thinking you seen i did not have the stock  hydraulic jacks  and i put the bigger beefier one on with big feet 

i did got get that i added a pic of my foot LOL
 
i made some more videos  again there very old  think it was around the time of the first iphone  and cell phone video and even youtube where not a big thing back the

there are some bad words in there here and there  as this video was made to be sent to a friend to let him know how things are talking
so if it sounds like i am talking to some one  it was him

2  https://www.youtube.com/watch?v=x7RDiYIhwRk
3  https://www.youtube.com/watch?v=_PHIZP6RnOc
4  https://www.youtube.com/watch?v=72HOCh9zPpE
5  https://www.youtube.com/watch?v=h11MN2RPBrU


this video was made today and edited today    PS no bad words here LOL

6 https://www.youtube.com/watch?v=Y2NZXpJ26q8
7 https://www.youtube.com/watch?v=hN9o-FVq0Iw
 
sorry i have not been posting over here  .. i have had alot of ppl pulling me at a def forum

but update  it runs 

over the 4th i got the last of the wiring in and test started it and it run  .

still alot more work in tell it can move or drive 

if every thing gos to plan tho i can be test driving it next month
 
here is a video  of the frist real run

i talk of needing help but i did find out latter it was air in the line

https://www.youtube.com/watch?v=esGlot31zWo
 
well got to test drive the RV today

https://www.youtube.com/watch?v=Mi09KpZkg5k#t=18
 
Just found this thread today, and I gotta say WOW!!!    Some serious skills there.  Very good job!!
 
thanks so much guys 

i do have to add again i am very sorry i have not been posting over here for some time 

i love this website but it is hard to keep resizing and adding pics here

i hope no one feels wrong of my to post where all new info has been going and if it is i am ok with the DEL of this post here

http://www.irv2.com/forums/f258/rv-fire-and-the-rv-that-just-wanted-some-love-198780.html

there is alot of new pics and whats been going on there

catblaster i see seen what you said and said some thing on the video right back

 
Did the smoke smell from the fire clear up? 

Talked to some repair people that fix houses after a fire and they said it is pretty tough to get all the burn smell out.
 
Back
Top Bottom