coleman aluminum roof

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
D

DD1229

New member
Joined
May 27, 2013
Posts
3
Hello all. Apparently some water got under one of the tracks on the roof ( 04 coleman Bayside ) and now I have a small amount of wrinkles on the ceiling covering. I have removed cleaned and sealed (Dicor) now is there a way to remove enough of the "headliner" to remove the wrinkles, and then glue it back without destroying it. the ceiling still feels solid so I hope this doesn't become too involved. any suggestions or insight would be appreciated.
Thanks, DD
 
this is free advice so take it as that... :)

i have used a razor blade and made tiny slits in the wrinkles and then used a NON staining glue and some painters tape to hold it in place till the glue dried, when it was done you almost had to know it was bad before because you couldnt hardly see it...
 
You must log in or register to reply here.

Latest posts

Members online

Total: 1,144 (members: 25, guests: 1,119)

Forum statistics

Threads
131,934
Posts
1,387,752
Members
137,684
Latest member
kstoybox
Back
Top Bottom