EPDM Coatings
rvupgradestore.com Composet Products PO Box Zone
Over The Network Custom Yacht Interiors

Author Topic: Sewer Solution  (Read 1510 times)

Roadtrekker2

  • ---
  • Posts: 7
Sewer Solution
« on: August 05, 2013, 01:48:08 PM »
I am a widow needing an easy way to empty the holding tanks.  I have been researching the Sewer Solution method.  It looks really great.  Has anyone ever used this on a 2004 Roadtrek?  I do not have a spring holding the hose up, but instead there is a cord way in the back that I do not connect or unconnect - the hose just drops down when the cotter pin is removed.

Any pictures of this in use?

Thank you very much.

Tom

  • Administrator
  • ---
  • *
  • Posts: 44377
    • RV Forum web site
Re: Sewer Solution
« Reply #1 on: August 05, 2013, 06:40:35 PM »
The Search button above will return a number of prior discussions on the subject of "sewer solution".
Tom.  Need help? Click the Help button in the toolbar above.

Gary RV_Wizard

  • Forum Staff
  • ---
  • *
  • Posts: 60375
  • RVer Emeritus
Re: Sewer Solution
« Reply #2 on: August 05, 2013, 07:32:31 PM »
I think the Sanicon system is even easier, if you have room to mount the pump unit.
Gary
--------------
Gary Brinck
Summers: Black Mountain, NC
Home: Ocala National Forest, FL

Jeff

  • Forum Staff
  • ---
  • *
  • Posts: 8966
Re: Sewer Solution
« Reply #3 on: August 06, 2013, 01:02:03 AM »
I used a Sewer Solution exclusively for 6 years and still use it for extremely long dump distances. On our last motorhome it was the only system that fit in our wet bay. It does use a few gallons of water dumping a black tank and it is susceptible to any solids that get in the tanks.
« Last Edit: August 06, 2013, 01:05:40 AM by Jeff »

 

Hosted by Over The Network