John From Detroit
Well-known member
Well, hooked the new used NEON to the motor home and left it running, towed it down to American RV (Burton, MI) and seperated the two, they drove the car into the shop and put a Remco Lube pump on it, Install went well,, We may have a minor drip but not sure yet (The man spilled some tranny fulid when re-filling and that may be what's dripping .. More on that later after I go to church)
Got the harness and indicator/control box installed in the motor home, it too tested good.
Plugged 'em in together and pop went the fuses pop.
Turns out the umbicial which Remco provided, had a HOT LEAD to CASE short in the plug... When he opened the plug housing up and we saw the bare wire clearly had touched the shell.. Amazingly poor workmanship on that end.
Strangly,, The other end was very clean and tight. No problem there at all.
Tech cut and re-dressed the wire, re-attached it (There was enough extra wire to do that) and now.. IT's working fine.
Got the harness and indicator/control box installed in the motor home, it too tested good.
Plugged 'em in together and pop went the fuses pop.
Turns out the umbicial which Remco provided, had a HOT LEAD to CASE short in the plug... When he opened the plug housing up and we saw the bare wire clearly had touched the shell.. Amazingly poor workmanship on that end.
Strangly,, The other end was very clean and tight. No problem there at all.
Tech cut and re-dressed the wire, re-attached it (There was enough extra wire to do that) and now.. IT's working fine.
