Anyone with a 2013 Jeep Rubicon with AirForceOne/SMI Braking System?

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
4ducksrus

4ducksrus

Well-known member
Joined
Nov 17, 2010
Posts
814
Is there anyone out there that has a 4 door Jeep Wrangler/Rubicon that is using the AirForceOne Braking System?  If so, where under the hood did you mount the control box?  My DH can't seem to find room anywhere!  We had it on our older Jeep Sahara and there was plenty of room, but this jeep has a very crowded engine compartment!!
TIA
Mikie
 
This is not a jeep but I post it to give you the idea, sometimes you have to get creative. You can mount the AFO above the engine or where ever you would like it. With a 3' x 1/2" piece of steel flatbar from home depot cut into 2 lengths. Drill it and use wire ties to mount so it is easy to move later if needed. Here I have the AFO unit mounted and a charging regulator towards the back. Hope it helps.
 

Attachments

  • AFO and RVI installed.jpg
    AFO and RVI installed.jpg
    58.4 KB · Views: 25
In response to your email. I use an RVI in cab braking system so no box to mount. I just ran the breakaway switch wiring through one of the provided grommets in the firewall.

Ernie
 
You must log in or register to reply here.

Latest posts

Members online

Total: 1,132 (members: 34, guests: 1,098)

Forum statistics

Threads
131,974
Posts
1,388,489
Members
137,723
Latest member
CarlSpackler
Back
Top Bottom