EPDM Coatings
rvupgradestore.com Composet Products PO Box Zone
Over The Network Custom Yacht Interiors

Author Topic: 1947 FLXIBLE CLIPPER FRONT WHEEL BEARING SEALS  (Read 1397 times)

cineburger

  • Posts: 2
1947 FLXIBLE CLIPPER FRONT WHEEL BEARING SEALS
« on: June 26, 2014, 10:28:32 AM »
 I am searching for information on current front wheel bearing seals for 1947 Flx Clipper; the Timken bearing numbers: 539,444,532-A and 432 are all good current numbers, but apparently 2 different front axles were used on this model in 1947--(actually 3 numbers but the last 2 used the same seals) 35141-PX-7 and 35141-WX-10 & WX-17. The original seal number A1205-B-600 has an interchange according to Baker Bearings in Portland, OR but no one has yet come up with an interchange for A1205-L-194 (the seal assembly for the last 2 axle #'s). Anybody have any good info on this??? How bout dimensions?? Thanks. david  (cineburger@gmail.com; 410-320-6561)
Modify message

Mavarick

  • ---
  • Posts: 2030
Re: 1947 FLXIBLE CLIPPER FRONT WHEEL BEARING SEALS
« Reply #1 on: June 26, 2014, 09:12:38 PM »
I would try another bearing house like Kaman Bearing. They should be able to come up with dimensions off the stock numbers to get you something that will work. Someone has to have something as it does not have the original seals in it. You might have to tear it down to get a good number or dimension on the seals.
https://ec.kamandirect.com/us/index.jsp
2009 Tiffin Allegro Bus 43 QRP
Powerglide Chassis, 425 Cummins, Allison 6 Speed
2010 CRV - Blackhawk 2 - Air Force One
2002 Heritage Classic
Washington State

 

Hosted by Over The Network