Just bought a !990 Carri-lite 32' 5th wheel. It's in great shape for it's age. I'm trying to take out the dinette booth . Table was a piece of cake, but after about 2 dozen screws (some of which put up quite a fight) the bench still isn't budging. Is it glued to the wall and/or the cabinet behind it? Any tips to getting this out in few enough pieces so that somebody else could use it? Many advance thanks.
Will I need an axe to take out this booth?
- Thread starter KTinKY
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Ernie Ekberg
Well-known member
- Joined
- Mar 17, 2005
- Posts
- 1,591
The back of the booth has a piece of paneling that is stapled on. Pry that off and you will see more screws
halfwright
Well-known member
- Joined
- Feb 27, 2013
- Posts
- 1,212
Don't use an axe. A reciprocating saw is much easier.
SeilerBird
Well-known member
When I removed my dinette it seems like it took me all day and I removed about a million screws.
