kevoz
New member
- Joined
- Feb 28, 2015
- Posts
- 1
Greetings! I am a new member here and have a question at least a few of you have had to deal with. I am gathering supplies for a delam repair on my 07 JayCo Eagle 28.8RLS. I have a plan in place of how to get the resin inside, how to press it while it cures but am really unsure how much product I should have on hand. My only repairs will involve the front of the TT. I have delam about 5' x 1' and when I open it up I would bet it grows a bit. I have syringes and if needed, an old paint gun to get the resin inside. I just don't want to buy 1.5gal (resin+hardener) if a quart+pint will do. I would just like a little insight is all, I will probably end up with most of it sitting in a cabinet when I am done like all the other paints and chems I have bought over the years. Feel free to flame me if this is beating a dead dog here, I just started gathering and reading.
Cheers!
Kevo
Cheers!
Kevo
