I fried my converter/inverter in a 2003 Coleman pop up last summer. I purchased the same Chinese brand. There are only four wires but I still can't keep the silly thing running. It runs 4 seconds. You can hear a slight surge and it stops. It sits for 8-10 seconds, beeps loudly and starts running again...... only to do the same cycle. During the 4 seconds that it does run the lights in the camper do NOT come on.
Can anyone give me an idea as to how to wire this thing or what I've done incorrectly? The four white wires are ground and have been hooked onto the grounding slot. The main line coming in goes to the 20 amp breaker. I've got two other black that appear to be the 120 hook up that the main line coming out of the 20 amp also hooks to for camping when elec. is avail.
HAAAAAAAAALP!!! It just isn't worth the money to take this to a RV center but I don't want a "tent" either. Can anyone tell me what I've done wrong or how to wire this? Thanks all!
Dan
Can anyone give me an idea as to how to wire this thing or what I've done incorrectly? The four white wires are ground and have been hooked onto the grounding slot. The main line coming in goes to the 20 amp breaker. I've got two other black that appear to be the 120 hook up that the main line coming out of the 20 amp also hooks to for camping when elec. is avail.
HAAAAAAAAALP!!! It just isn't worth the money to take this to a RV center but I don't want a "tent" either. Can anyone tell me what I've done wrong or how to wire this? Thanks all!
Dan