EPDM Coatings
rvupgradestore.com Composet Products PO Box Zone
Over The Network Custom Yacht Interiors

Author Topic: Hybrid Camper tent roof support pole  (Read 1191 times)

kuvancho

  • ---
  • Posts: 9
Hybrid Camper tent roof support pole
« on: April 23, 2015, 03:04:57 PM »
I have a 2002 Dutchmen Lite Hybrid (by Thor) camper. The front fold down sleeping area has a support pole to hold up the tent roof. The plastic piece that attaches to the cross support has broke and I am looking for a replacement. Any ideas on where I might find a replacement?  Thanks
« Last Edit: April 23, 2015, 03:10:19 PM by kuvancho »

slalumiere

  • ---
  • Posts: 14
Re: Hybrid Camper tent roof support pole
« Reply #1 on: March 11, 2016, 07:11:41 PM »
I know this is old, but I found a great solution for it years ago on our hybrid.  I took a piece of CPVC pipe and cut it about 3/4" long.  I then took a hand saw and cut a slit in the pipe to slip over the cross support.  It took a couple tries to get the dimension right on.  I cut off the plastic from the support rod that was left.   I put a screw in the pipe piece into the end of the support rod.  I can't remember if that held or not- if it did not I then forced a piece of wood into the end of the support rod and then put the screw in.
2003 Winnebago Brave 34D
2003 Honda Accord
2011 Honda Pilot

 

Hosted by Over The Network