Hi everyone. I have a 2008 Fleetwood Bayside pop-up. First few times using it, on both battery and plugged in, no problems. Then, last trip, I was running my furnace as normal, producing good heat, and a loud bang occurred in the morning after running most of the night (cold up here in Canada)...not sure from where. I think this happened because I ran out of propane in my first tank. Packed up the unit and towed home without thinking much of it believing it was just related to the low propane.
Now, I have no power to my furnace or the lights in the unit. I changed to my full propane tank, all the breakers are "on" and all 4 fuses appear to be fine. When the unit is plugged in, I have power on my outlets and the fridge runs good on either battery or plugged in. But either with the unit plugged in or on battery, my furnace fails to kick in at all (no fan either), and the lights have no power to them.
Any suggestions?!?! Thanks in advance.
edit: I read somewhere that I need to reset the furnace because I tried to run it with no propane?
Now, I have no power to my furnace or the lights in the unit. I changed to my full propane tank, all the breakers are "on" and all 4 fuses appear to be fine. When the unit is plugged in, I have power on my outlets and the fridge runs good on either battery or plugged in. But either with the unit plugged in or on battery, my furnace fails to kick in at all (no fan either), and the lights have no power to them.
Any suggestions?!?! Thanks in advance.
edit: I read somewhere that I need to reset the furnace because I tried to run it with no propane?