Hi. I'm new here. Hopefully this is in the right spot. So I have a 1983 Winnebago Brave model 83wcf27ru. The 110 VAC does not work with shore power and does not work with the Onan 4K generator. Generator looks great except for exhaust pipe. I am clueless but will detail what I have seen.
First, generator has a 3 position on switch and in to position will start but not stay running if coach it turned off. Assume this is low battery. I can run gererator for a minute and put in middle position but it will shut down.
The shore power area has along cord plus an extra socket. I assumed this extra socket (30 amp) was so you could plug 2 shore 15 amps in and run a/c. Could it be I need to plug long cord into this socket when I run gen?
I have opened up electrical and not found any 110. But I did find 12v not that I even know what to look for.
There is a large magneto thing in the electrical. I have seen a lot of posts indicate transfer switch could be issue but I should have shore power. I have found the regular breaker/ fuse panel. Don't know where main coach 120v fuse is if there is one.
Pls help. Thanks!! Don
First, generator has a 3 position on switch and in to position will start but not stay running if coach it turned off. Assume this is low battery. I can run gererator for a minute and put in middle position but it will shut down.
The shore power area has along cord plus an extra socket. I assumed this extra socket (30 amp) was so you could plug 2 shore 15 amps in and run a/c. Could it be I need to plug long cord into this socket when I run gen?
I have opened up electrical and not found any 110. But I did find 12v not that I even know what to look for.
There is a large magneto thing in the electrical. I have seen a lot of posts indicate transfer switch could be issue but I should have shore power. I have found the regular breaker/ fuse panel. Don't know where main coach 120v fuse is if there is one.
Pls help. Thanks!! Don