Breckenridge Slide-out Seals

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
B

Bearley1

New member
Joined
Sep 23, 2014
Posts
1
Hello,

We have an '03 Breckenridge Park model that is now "permanently" situated. We're looking to replace the vinyl fabric "sleeves" that seal off the slide-outs with something that is more permanent and hopefully more weather-proof. I am thinking of an 8" wide strip of roofing rubber attached to the sidewall of the trailer, and to the walls/roof surface of the slide-out. What should I use for nailing (actually screwing) strips?Anybody have any ideas?

Thanks.
 
I have an 08 Golden Falcon 390 with the same issue.  Did you have any luck with the repair?
 
I'm unclear what these "sleeves" would look like. The slides I'm familiar with have a 2-3" rubber wiper flaps at the sides and D-shaped rubber seals all around. My imagination isn't helping with an 8" wide strip of EPDM rubber (which isn't great at wear resistance anyway). Maybe a photo would help?

If you need something to hold down the edge of the material and screw through it, how about 1/16" x 3/4" aluminum bar? Or one of the many varieties of aluminum moldings available?
http://www.extrude-a-trim.com/aluminum-extrusions/ticket-moulding
 
You must log in or register to reply here.

Latest posts

Members online

Total: 1,150 (members: 25, guests: 1,125)

Forum statistics

Threads
131,933
Posts
1,387,742
Members
137,684
Latest member
kstoybox
Back
Top Bottom