EPDM Coatings
rvupgradestore.com Composet Products PO Box Zone
Over The Network Custom Yacht Interiors

Author Topic: Bus heater questions  (Read 723 times)

JCsSkoolie

  • Posts: 1
Bus heater questions
« on: March 13, 2016, 01:59:46 PM »
Hi, my name is John and I just recently began a school bus conversion of my own. This is my first time doing something like this and so I'm glad that there are those who have gone before me that can hopefully answer the questions I have to help me not make any major mistakes. So here it goes. I'm concerned about what I need to do with the line coming into the bus for the heater. I removed it yesterday and temporarily took a piece of the radiator hose and looped it back on itself just behind the drivers seat. I'm not sure how to handle this and I don't want to screw up and impede the flow of coolant to any part of the engine that may need it. I would eventually like to take it back a little further to get rid of the connections behind the drivers seat. I'm hoping there is someone out there who can give me direction as to how to proceed. Thank you for your help.

utahclaimjumper

  • ---
  • Posts: 2931
Re: Bus heater questions
« Reply #1 on: March 13, 2016, 08:07:52 PM »
 What do you intend to heat the coach with, most bus heaters are robust enough to heat a large area and it is needed just as much after a conversion as before. Is your bus front or rear engined?, diesel or gas?, >>>Dan
38' American Tradition 38TT/330 turbo Cummins
Jeep liberty 4 down
72 VW Baja 4 down
Cedar City, Utah
USAF vet. 59-63
The difference between intelligence & stupidity is: intelligence has it's limits
      Albert Einstein.
President Western GM Coach chapter FMCA

 

Hosted by Over The Network