Installing torklift glow steps on 2014 lance 850

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

flashcracker

Member
Joined
Jun 11, 2015
Posts
6
I need to install glow steps to a 2014 lance 850 that has none. How do I find out where the frame is and whether to run the bolts clear through then washer and nut the back side. Don't know if the lower span under the door is all frame or just a portion, trying not to drill extra holes experimenting. If anyone has done this or can help with information, It will sure be appreciated to get this project done. I have contacted Lance for a frame diagram but no answers after 9 days, don't know how their process works.
Thanks
Flash
 
I found out that at the bottom of the 850 there is a 4 in piece under the door that is composed of a 1" square aluminum tube followed by a 2" wood block in the middle and then another 1" square aluminum tube at the bottom. So by finding the middle of the wood block I mounted the mounting bracket for the stairs to the middle of that support. Lance uses the same wood block to mount the lower ladder support to also. Thanks to the fellow camper that sent me the diagram!
 
Back
Top Bottom