Trombetta replacement

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

69bbc

Well-known member
Joined
Mar 21, 2011
Posts
63
Location
Picton Ontario, Canada
We experienced a problem with sporadic deployment on the front levelers ( LCI  model ) on my 2006 Georgetown. Dealer replaced the relay pack on the hydraulic pump, then stated it was the Trombetta. None in stock. They wanted a couple of hours  labour to replace it next visit . DUUUH.  I looked at the part and ordered one myself. Installation  questions: I am assuming that with shore power unplugged, 12 volt house batteries disconnected there should be no other power in play . Levelers up and slide in, remove  the existing wiring and replace in the same position on the new Trombetta. Did I miss anything before the work starts ?? thanks  Larry
 
Larry, the only thing might be if your leveling system is powered from the chassis battery bank; In that case, turn off the chassis battery(ies).
 
Mark the wires and terminals with wire numbers, take pics you can refer back to. The solenoid is probably simple to wire,  but I've seen people mess up with only two wires.
 
Don't just mark the wires, take a picture with a digital camera or your phone.

2 hours to replace a trombetta?  Absurd. 
 

Latest posts

Forum statistics

Threads
131,972
Posts
1,388,448
Members
137,722
Latest member
RoyL57
Back
Top Bottom