Nomadic Mason
Active member
I have looked everywhere and I can't see to find the degree of wheel cut for my home on a Ford chassis. Does anybody know what the wheel cut is for this chassis?
1996 Winnebago Adventurer wheel cut
- Thread starter Nomadic Mason
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
John Hilley
Well-known member
It is 50 degrees
OP
OP
Nomadic Mason
Active member
Thanks. Now I will know what my reference point for turning is according to the LazyDays video.
Gary RV_Wizard
Site Team
Are you sure, John? I didn't think any gas chassis had a 50 degree wheel cut back in 1996. Fords F53's were 42 degrees in at least some models. Only reference could find is an ad bragging that it was increased to 50 degrees in the 2008 model.
http://ophelia.sdsu.edu:8080/ford/04-10-2008/about-ford/news-announcements/featured-stories/featured-stories-detail/f53-motorhome-chassis.html
However, a chassis with 16" or 19.5" wheels often had a better cut than the 22.5's
http://ophelia.sdsu.edu:8080/ford/04-10-2008/about-ford/news-announcements/featured-stories/featured-stories-detail/f53-motorhome-chassis.html
However, a chassis with 16" or 19.5" wheels often had a better cut than the 22.5's
