Me and a buddy are working on an RV doing some remodeling etc and we need some help wiring up a norcold fridge model N641. First let me say we have the fridge out of RV currently and the circuit board was gone from the fridge when we got RV and all the wires are just hanging loose. We ordered a new circuit board. (Norcold 628661 Refrigerator Relighter Circuit Control Module Board) The board has several electrical hookups and we are not sure which wires plug in where. We did figure out which wires go to the heating element for the fridge and we wired it up direct to 120 volt and it cools very well. There are 2 black wires coming from the heating element and those are the 2 that we hooked up to 120 volt. There is also a red wire coming from that area. There are 2 white wires coming from what looks like a possible thermostat or some sort of cut on and off device. Then there is a plug for the 120 volt electrical. Then a plug with several wires that is very obvious where it plugs in due to the shape of plug. I have pics of the wires and back of fridge and pics of the circuit board. There is a schematics on back of fridge that does not make any sense to us. Can anyone please help us out by drawing a diagram and maybe even sending some pics. Thanks.
Anybody have norcold N641 fridge? Have questions on that model.
- Thread starter 2shus
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
BoomerD
Well-known member
This should have everything you need:
http://direct.bryantrv.com/docs2/docs/ncoldnnewnseries.pdf
This is the board for my N611 (with cover on) if it helps.
http://i.imgur.com/S4w9OOu.jpg
http://direct.bryantrv.com/docs2/docs/ncoldnnewnseries.pdf
This is the board for my N611 (with cover on) if it helps.
http://i.imgur.com/S4w9OOu.jpg
