GarrettG
Active member
I read a post by SeaBreeze331 and not quite sure how the wiring was configured with the bypass switch. I understand the purpose is to just turn off the fuses to there isn't any battery drain but not sure what to use besides a switch and where exactly bypass everything. Here is the original post. The other post was from a year ago so thought it better to start a new thread. Any clarity or other suggestions would be great. I was considering just trying to add a bulb to the tail assembly. I did the diode set up in my CR-V and it worked but I'm not sure I want to splice into the wires on the Acadia. I have a Ready Brake (basically a surge brake) and plan on moving the break cable from the CR-V to the Acadia.
http://www.rvforum.net/SMF_forum/index.php/topic,87265.msg786984.html#msg786984
http://www.rvforum.net/SMF_forum/index.php/topic,87265.msg786984.html#msg786984
