Hi Guys, I have a 1996 Lance Squire 3000 Truck Camper and need to install my Inverter and also
may be picking up a new Winegard Dome system. For the inverter, I want the unit to be near the TV
table which is central to the antenna coax feed and 110 receptacle. My rig has some custom work
on it where previous owner installed stereo and I see wires routing back there but wonder how to get
started. For inverter routing since the house batt box is basically under the sink, I'm wondering if there
is a "behind the scenes" open area or crawl space if you will that leaves the under sink area and heads
towards the bunk to the front of the camper and then upwards to the TV table area?
Pretty much the same question for the Winegard Dome coax which I assume comes down the fridge vent
with the solar wiring but that is on the starboard side of the rig.. I would love to learn the behind the scenes
secrets of Lance campers.. Here is a shot of my stereo setup.
may be picking up a new Winegard Dome system. For the inverter, I want the unit to be near the TV
table which is central to the antenna coax feed and 110 receptacle. My rig has some custom work
on it where previous owner installed stereo and I see wires routing back there but wonder how to get
started. For inverter routing since the house batt box is basically under the sink, I'm wondering if there
is a "behind the scenes" open area or crawl space if you will that leaves the under sink area and heads
towards the bunk to the front of the camper and then upwards to the TV table area?
Pretty much the same question for the Winegard Dome coax which I assume comes down the fridge vent
with the solar wiring but that is on the starboard side of the rig.. I would love to learn the behind the scenes
secrets of Lance campers.. Here is a shot of my stereo setup.