EPDM Coatings
rvupgradestore.com Composet Products
RV Life Magazine RV Park Reviews RV Trip Wizard

Author Topic: tv mount  (Read 760 times)


  • ---
  • Posts: 10
tv mount
« on: June 25, 2016, 07:57:31 AM »
Ive used a number of mounts for small tv's in my converted Sprinter van, and while they all did the job fine for a time, they all bounced so much that it eventually broke the internal mounting out of the plastic housing on the rear of the tv. The mount never came off the wall and never let go of the tv; Its the tv that wasnt built to endure that amount of bouncing.  So....Im guessing most others who have encountered this issue have resorted to simply housing the entire tv in some sort of angled wall-mounted bracket or other housing with enough of a lip on the front face to hold the tv inside, while not interfering with the remote sensor and viewing area.  Im thinking of building this with 1/4 or 3/8 inch birch plywood or similar.  Anyone have a better idea?  Or seen it done and can point me to a source of pictures, to feed my noodling mind?  Thanks folks.

Ernie n Tara

  • ---
  • Posts: 3487
  • Life is Good - Together
Re: tv mount
« Reply #1 on: June 25, 2016, 07:11:02 PM »
I just installed the tv with a standard mount and arranged it so I could strap it in place while moving. Worked just fine for two years.

Ernie 'n Tara

2011 Winn Journey 34y
2012 Jeep Rubicon - Dozer (orange - kinda)
2006 Jeep Wrangler