Sponsored by Winnebago Industries

Author Topic: Driver & Passenger variance buttons covering attachment screws  (Read 538 times)

05winnie

  • ---
  • Posts: 16
How does one remove the fastener cover buttons that attach the valiance over the front side windows? Need to tighten one of the screws and don't want to distroy the button covering the screw. Thanks.
05 Sightseer pushed by a 2013 Chevy Sonic

Gary RV_Wizard

  • Forum Staff
  • ---
  • *
  • Posts: 60427
  • RVer Emeritus
Re: Driver & Passenger variance buttons covering attachment screws
« Reply #1 on: June 26, 2016, 12:28:04 PM »
I'm not familiar with your coach, but most such caps just pop off. Pry up carefully with a flat blade, e.g. a stiff putty knife.
Gary
--------------
Gary Brinck
Summers: Black Mountain, NC
Home: Ocala National Forest, FL

John Canfield

  • Forum Staff
  • ---
  • *
  • Posts: 11816
    • Jane and John's Internet Home
Re: Driver & Passenger variance buttons covering attachment screws
« Reply #2 on: June 26, 2016, 06:53:16 PM »
Gary is most likely correct but I have not encountered those on my Horizon.
--John
2005 Horizon 40AD, 2006 Jeep Rubicon Unlimited
Our Horizon projects
Our weather

05winnie

  • ---
  • Posts: 16
Re: Driver & Passenger variance buttons covering attachment screws
« Reply #3 on: June 28, 2016, 01:19:19 PM »
Thanks, the button snaps off. Winnie used snap top screws to attach the valiance. It appears to have been over tightened. Need to find a bigger screw.
05 Sightseer pushed by a 2013 Chevy Sonic

 

Hosted by Over The Network