TangoMike
Member
I bought a used Winnebago recently and was investigating the shower and noticed the back wall opposite the shower doors is not secured to the back wall. If you push on it the wall gives about an inch until it makes contact with the wall. There is no seal at the top of the panel to the wall so you can put your fingers in between the panel and the wall. The front and rear walls are secured firmly but not this side wall. Is this normal or should I use some type of adhesive to secure the panel to the wall? Seems to me it would be easy for water to get in between the wall and the shower enclosure. The panel has a large clam shell on it.
